Guitar pickup manufacturing workshop in Japan, 1970s — Nisshin Onpa / Maxon

INTRO

Maxon PU-119 Stratocaster Pickup

Maxon / Nisshin Onpa — History of the Japanese Brand

Origins — OEM Guitar Pickup Manufacturer

Behind the Maxon brand lies the Japanese company Nisshin Onpa, founded in the mid-1960s. To understand its origins, the company must be placed in the context of the Japanese guitar industry of the time: guitar manufacturers focused on lutherie, finishing and assembly, outsourcing all component production to specialists. Pickups were thus entrusted to dedicated subcontractors — among them Orii, Keiyo, Goto, and Nisshin Onpa.

Nisshin Onpa therefore began as a simple anonymous industrial supplier, producing white-label pickups for various Japanese guitar brands. These 1960s guitar pickups (considered at the time as mere components) had no identity of their own — no name, no serial number — fading into the background behind the guitars they equipped.

1969 — Entering the Effects Pedal World

It was in 1969 that Nisshin Onpa took a further step by also becoming a guitar effects manufacturer. One of their first creations — a fuzz-wah pedal — met with great success and was marketed under several names, including Ibanez.

It was precisely this partnership with Ibanez that would propel the company onto the world stage. During the 1970s, Ibanez became one of their main OEM customers. Nisshin Onpa designed and manufactured the legendary Tube Screamers TS-808 and TS9, as well as the FL9 Flanger, CS9 Chorus and AD9 Analog Delay — from 1974 until 2002. Open the hood of a Tube Screamer from that era and the Maxon name appears on the circuit board.

In parallel, Nisshin Onpa developed in the early 1970s its own range of compact effects sold in Japan under the Maxon brand.

The 1970s — The Golden Age of Guitar Pickups

The upmarket shift of Japanese guitars in the 70s pushed Nisshin Onpa to develop far more ambitious pickups. Greco used Maxon pickups for its instruments throughout this decade and into the early 80s — models UD, U-1000, U-2000, and the PU series. It was during this period that the first stamped and dated pickups appeared, allowing them to be precisely identified today. The PU-119 "Excel 31276" belongs to this generation.

1981 — The End of the Pickup Business

In 1981, Nisshin Onpa definitively exited the pickup market: Fujigen acquired the entire division — patents, know-how, equipment and presumably the workforce. A chapter closed. From 1982 onwards, the pickups equipping Greco guitars were manufactured in-house by Fujigen, which had just equipped itself with CNC machines for guitar parts production. The new references — Dry 82, Screamin' 82, Double Trick — took over, without carrying forward the Maxon designations.

2002 — Maxon Goes Solo

On the effects side, the split with Ibanez came in 2002. Nisshin Onpa then accelerated the development of its own Maxon line, focusing on vintage-style analogue effects — delays, choruses, flangers, overdrives. It is in this form that the Maxon brand is known today by the vast majority of guitarists, who often ignore the fact that it began its life winding pickups in the shadow of the great Japanese brands.

Focus on the Maxon PU-119 Stratocaster Pickup

The PU-119 is exclusively a Stratocaster-type pickup. It equipped only single-coil Fender-style guitars produced in Japan during the so-called lawsuit era — those years spanning the 1970s and early 1980s when Japanese manufacturers faithfully reproduced American instruments, often with remarkable build quality.

Greco Guitars — The Natural Home of the PU-119

The presence of the PU-119 in Greco catalogues is precisely documented. Until then, all SE models (SE-500, SE-600, SE-800) were fitted with the Maxon PU-100. It was in 1978, with the release of an intermediate model, the SE-700, that the PU-119 made its first appearance. From 1979 onwards, the PU-119 became more widespread and equipped the SE-600 and above, reflecting the general quality improvement across the Greco range at that time.

It is also found, more occasionally, in high-end Ibanez models and other MIJ (Made in Japan) guitars of the period — Nisshin Onpa supplying several manufacturers simultaneously.

The Difference Between PU-100 and PU-119

The distinction between these two models is often a source of confusion among collectors. The original PU-100 features a narrower pole spacing (50mm) than the Fender standard. The PU-119, introduced on the SE-700 in 1978, adopts the standard spacing of 2 1/16" ~ 52mm, making it directly compatible with Fender hardware of the era. There is also an intermediate variant, the PU-100W, with wider spacing, which appears occasionally in certain SE-500 models from the 1979 catalogue.

The Evolution of PU-119 Markings

The markings stamped into the baseplate allow an example to be dated, though with a margin of uncertainty: Maxon never applied a strict rule in this regard. The inscription "Excel" appears from around 1975-76. The number 31276 is also present from this period, sometimes alone, sometimes alongside Excel — the combination of both appearing to be concentrated around 1979. From 1980 onwards, only the 31276 remains, the Excel designation disappearing for good. Some examples bear both inscriptions, others just one, others none — without this affecting their sonic or constructive characteristics.

The End of the PU-100 & 119 Nomenclature

From the 1980 Greco catalogue onwards, the nomenclature was entirely revised. The PU-100 and PU-119 designations disappeared in favour of new references — PU-S3, PU-S5, PU-S8. The S5 and S8 models remained alnico pickups directly derived from the Excel family, but now stamped with 31276 only. The PU-119, as such, quietly faded away — without announcement, without a named successor.

The transition to Fujigen in 1981-82 adds a further layer of complexity. Fujigen having acquired the entire Nisshin Onpa pickup division — machinery, equipment and tooling included — the first baseplates produced by Fujigen most likely bear the same 31276 number, probably because it was physically inscribed in the inherited tooling.

This continuity of marking makes the transition period particularly difficult to identify for collectors. A pickup stamped 31276 from 1981-82 may equally be a late Nisshin Onpa production or an early Fujigen production — same number, same appearance, but not necessarily the same materials or the same craftsmanship. The only reliable approach is to cross-reference the dated serial number with the known periods of the acquisition, an exercise that remains imprecise even for specialists.

Measurements and Observations on Original Examples

I recently had the good fortune of a client entrusting me with a complete 1979 set. The marking — both Excel and 31276 — confirms the date. The middle pickup had lost its output despite a very good general external condition. An ideal scenario: two functional pickups for sonic evaluation and electrical measurements, and a faulty pickup available for material analysis — wire diameter, coil geometry...

I have a project to build a dewinding machine equipped with a turn counter and capable of capturing the winding pattern — but I have yet to find the time to see it through. For this pickup, I therefore proceeded the old-fashioned way: a patient search for the break, unwinding in batches of 100 turns...

The first thing I can debunk: not all PU-119s are protected against corrosion between the magnet and the wire (varnish or tape on the magnet). The break was found right there, on the very first layer, the one in direct contact with the low E magnet. This is a well-known issue with vintage Fender-style pickups: the wire's insulating varnish can chemically react with the magnets over time. Add to this the mechanical tension — on a rectangular coil, the wire is subjected to higher tension at the ends. Corrosion, chemical reaction, tension: everything converges at the same point, and the wire breaks.

What is most surprising is that I have in my possession a 1977 set (most likely PU-100s) where the magnets were clearly varnished before winding. I understand that this lengthy process (dipping, draining, drying...) might be dropped in an industrial setting, but a small piece of tape over the magnets is quick, inexpensive and highly effective. They had tape — every coil is protected on the outside with adhesive tape.

A tip of the hat to them for this poor choice — it allows me to access the coil without sacrificing a working pickup. Nothing unusual to report: it is well made. Vulcanised fibre flatwork, 5mm diameter magnets with bevel, consistent pole stagger... Some dimensions follow US standards — pole spacing and mounting screw spacing — but beyond that, the metric system unmistakably reveals a non-American origin.

Maxon PU-119 1979 Greco Stratocaster SE-600 coil dimensions
Maxon PU-119 1979 Greco Stratocaster SE-600 pickup specs measurements

Back to top